Midi cc controller!

[Ioannis]

Worst case scenario:

pot at 10K with 100nF gives 1msec time constant.

10 pots x 1msec gives 10msec plus your commands in the programm.

So you cannot get rapid reply with this method. A PIC with ADC I 'm afraid is what you need here.

Ioannis

[Alaskanphoenix]

Thanks a a lot Ioannis.

If i substitute the cap with a smaller one?

[Ioannis]

Yes you can I suppose use smaller caps but I have not checked it. I guess from the idea of implementing that kind of adc the range is limited. I would not try smaller than half the 100nf. I feel that you may have to use a fast analog to digital converter or at least try a PIC with an adc.

Ioannis

[Alaskanphoenix]

I think i'll try some other pic like 16f88 or better the 16f876!

thanks a lot