Thanks Melanie but it still doesn't work. My programmer gives me the option to change CCP1 ports on the F818 but not the F88. I spent hours changing the code but the HPWM command always comes out on RB0.
@ DEVICE MCLR_OFF, INTRC_OSC, WDT_ON, LVP_OFF, BOD_OFF, PWRT_ON, PROTECT_ON, CCPMX_OFF
DEFINE CCP1_BIT 3 ' ***IT'S STILL ON RB0
It compiles without errors but RB0 still outputs the PWM. HELP!! The PC Board pattern will allow the use of RB3 perfectly. If I HAVE to use RB0, I have to cut traces & solder jumper wires. Thank you.
Bookmarks