Question#2:
On the visual studio.net side: In this code below that i got from EasyHid how do you fill in where it says: put your code here?
I would appreciate Any examples:

Public Sub OnPlugged(ByVal pHandle As Integer)
If hidGetVendorID(pHandle) = VendorID And hidGetProductID(pHandle) = ProductID Then
' ** YOUR CODE HERE **
End If
End Sub

'************************************************* ****************
' a HID device has been unplugged...
'************************************************* ****************
Public Sub OnUnplugged(ByVal pHandle As Integer)
If hidGetVendorID(pHandle) = VendorID And hidGetProductID(pHandle) = ProductID Then
' ** YOUR CODE HERE **
End If
End Sub

'************************************************* ****************
' controller changed notification - called
' after ALL HID devices are plugged or unplugged
'************************************************* ****************
Public Sub OnChanged()
Dim DeviceHandle As Integer

' get the handle of the device we are interested in, then set
' its read notify flag to true - this ensures you get a read
' notification message when there is some data to read...
DeviceHandle = hidGetHandle(VendorID, ProductID)
hidSetReadNotify(DeviceHandle, True)
End Sub

'************************************************* ****************
' on read event...
'************************************************* ****************
Public Sub OnRead(ByVal pHandle As Integer)

' read the data (don't forget, pass the whole array)...
If hidRead(pHandle, BufferIn(0)) Then
' ** YOUR CODE HERE **
' first byte is the report ID, e.g. BufferIn(0)
' the other bytes are the data from the microcontrolller...
End If
End Sub

'************************************************* ****************
' this is how you write some data...
'************************************************* ****************
Public Sub WriteSomeData()
BufferOut(0) = 0 ' first byte is always the report ID
BufferOut(1) = 10 ' first data item, etc etc

' write the data (don't forget, pass the whole array)...
hidWriteEx(VendorID, ProductID, BufferOut(0))
End Sub
End Class