Macro Error

[Darrel Taylor]

The 18F458 only has 2 CCP modules. One is a normal CCP, and the other is an Enhanced CCP or ECCP.

The ECCP does have several outputs, and can be used for controling other types of motors, but it won't give you that many PWM outputs, and you can't choose which pin to use.

You can still use it like a normal CCP, but the output will be on RD4.

HPWM 2,127,5600

So, 1 selects the CCP and 2 selects the ECCP.
<br>

[Darrel Taylor]

Oh yeah, forgot to mention that you need to add these lines to the bottom of the 18F458.INC file in your PBP folder.

CCPR2H  = ECCPR1H
CCPR2L  = ECCPR1L
CCP2CON = ECCP1CON

[shawn]

Darrel
ThankYou for your help it has been awhile since I've been able to work on my projects.
Shawn

[shawn]

Hey Darrel
I Still can not get the ECCP Port to work. I added the three lines to the INC file.
This is what I have for Code.

Define OSC 20 'OSC (20Mhz)
Include "modedefs.bas" 'Includes Definitions.
Define Loader_USED 1
INTCON = %00000000 'Turns off all Interrupts.
ADCON0.0 = 1 'Turns off A/D Module
ADCON1 = 6 'Turns PortA and PortE to Digital Pins
'Defines wait time for PulsIn.
TrisB.1 = 0
CMCON = 7
HPWM 1,127,40000
HPWM 2,200,40000
Main:
PortB.1 = 1
Pause 1000
PortB.1 = 0
Pause 1000
Goto Main

I can get this part of the code to work HPWM 1,127,40000.
But I can not get this part to work HPWM 2,200,40000.
I have all of the RD4 for ECCP and RC2 for CCP.
Please tell me what I'M missing can both ECCP and CCP run at the same time?
This is driving me nuts.
Thanks

[Darrel Taylor]

Shawn,

Oops, 1 more thing.

DEFINE CCP2_REG PORTD 'Hpwm 2 pin port 
DEFINE CCP2_BIT 4     'Hpwm 2 pin bit

That let's the compiler know which pin to set as an output for HPWM. It defaults to PORTC.1
<br>