vb6 to pic basic

[skimask]

A simple thought that's tripped me up more than once...
Is there a MAX232 type RS232 converter in the middle somewhere?
Have you tried both SerOut with n9600 and then with t9600?
The PIC's 5v serial comm's might not be enough to drive the radio's serial port input.
But I'm guessing since I don't know anything about the radio itself...just mentioning something that's bitten me a number of times for a number of days only to have me kick my own butt for not thinking of it sooner!
JDG

[Darrenmac]

No this is not a max232 in the circuit, just direct connect, I have not tried any other baud rate (this is the default in the radio and works fine with simple vb6 program

[skimask]

Well, if there's not a max232 in the middle, then you might be back to the 5v serial comm not being enough to drive the receivers inputs, which might want the +12/-12v that a real rs232 serial port would give you. The PicBasic code looks fine to me, no errors I can see. Hope this helps in some small way.
JDG

[Darrenmac]

Thanks for that but I have found that using a 10MHz crystal I had the fuse bit for XT set instead of HS. Thanks to Charles in another thread that I picked up on my mistake.

[skimask]

DOH! Good find...you're not alone on that one!
JDG