? on code

[Sam]

OK,
That "almost" does it. But when B.1 goes low again,B.0 reruns the same routine as it does when B.1 goes high.

I tried more code variations on my own and have been through the manual several more times and I've not got it figured out.

Please be patient with me,I WILL learn this.

Your help is much appreciated,
Sam

EDIT: I got b.0 to stay low when B.1 went low by looping IF B.0=0
But, now when B.1 goes high again,B.0 stays low. I need it to re-run each time B.1 goes high.

Thanks