If you are after a solution for a level shifter here is an interresting Application Note from PHILIPS
AN97055
With SOT23 FETs and 805 (or 1206) Resistors it takes minimal PCB space.
If you are after a solution for a level shifter here is an interresting Application Note from PHILIPS
AN97055
With SOT23 FETs and 805 (or 1206) Resistors it takes minimal PCB space.
regards
Ralph
_______________________________________________
There are only 10 types of people:
Those who understand binary, and those who don't ...
_______________________________________________
Yes it takes little space. And the new link is this
www.adafruit.com/datasheets/an97055.pdf
Ioannis
Or you could use one of these... I use them all the time. They make a 4 channel and an 8 channel version.
Oops, I can't upload the data sheet, It's too big. The part number is TSX0102 for the 2 channel one and TSX0104 for the 4 channel one. They are made by Texas Instruments. Try it, Youl'l like it...
Dave Purola,
N8NTA
EN82fn
Bookmarks