12F629 maximun Baudrate

[MaxG]

Thanks Melanie. I yesterday put a 20Mhz XTal and all in my "old fashioned assembler firmware" started to run under PBP (there is some line in assembler for the interrupt handler, but in general the program has won in clarity and number of features).
Maxi.

[n0yox]

I am using a 12f629 when I use the internal oscillator my project runs great, However when I switch to the below config and use a 10 mhz ceramic resonator my project does nothing. Please help me understand what I am doing wrong?

#CONFIG
cfg = _HS_OSC_
cfg&= _WDT_ON ; WDT enabled
cfg&= _PWRTE_OFF ; PWRT disabled
cfg&= _MCLRE_OFF ; GP3/MCLR pin function is digital I/O, MCLR internally tied to VDD
cfg&= _BODEN_ON ; BOD enabled
cfg&= _CP_ON ; Program Memory code protection is enabled
cfg&= _CPD_OFF ; Data memory code protection is disabled
__CONFIG cfg
#ENDCONFIG

define OSC 10

[mackrackit]

Give this a try.

#CONFIG
    __config _HS_OSC & _WDT_ON & _MCLRE_OFF & _CP_OFF

#ENDCONFIG

[n0yox]

Thank You for your reply! I am up and running. Your code worked and I found my code should have been

#CONFIG
cfg = _HS_OSC
cfg&= _WDT_ON
cfg&= _PWRTE_OFF
cfg&= _MCLRE_OFF
cfg&= _BODEN_ON
cfg&= _CP_ON
cfg&= _CPD_OFF
__CONFIG cfg
#ENDCONFIG

define OSC 10