Quote Originally Posted by MaxG
Hi,
I put a 12Mhz cristal to make run a 16F84A. Again, if I try to go faster than around 50K baud (I have got near 90Kbaud programming 57600 and making the PIC believe that its cristal was 3.5Mhz) I got the same rubish out the selected pin for serial output. It happens the same with 12F508, 12F629 and now 16F84A. Also, DEBUG seems to reach a higher baudrate than SEROUT2 on the same µ.

All these nonsenses are puzzling me. I routinely programm in assembler for 16F876-20 and send data through a twisted pair cable at about 1.125 Mbit/sec.

Has somebody push the commands SEROUT2 or DEBUG to the limits?

Thanks.
Maxi.
I'm sorry, I just don't understand what you're trying to do here. Debug will run to 115K baud. If you want faster, go hardware, or shiftin/ shiftout with a faster clock.