Ascii debug issues?

Results 1 to 12 of 12

Threaded View

  1. - 17th November 2005, 20:17 #7
    milestag's Avatar
    milestag
    milestag is offline Junior Member
    Join Date
    Sep 2005
    Location
    Dayton, Ohio
    Posts
    72

    Did you find this post helpful? Yes | No

    Default

    For mine, I am using T9600 for SEROUT. And Hyperterm is set to 8N1.

    Oscillator config fuse is set to XT (done in the bootloader firmware).

    As I said, HSEROUT works perfectly. The bootloader runs smoothly at 19200, then I use the DEFINES in the PBP program to set the USART to 9600 baud.

    I WILL find the problem....eventually . I haven't exhausted all of my methodical troubleshooting options yet. And I have a bit more reading up on the USART. It's possible I can just use the USART once I learn how to quickly switch between USART and using the pin as a digital I/O.

    But it concerns me that I can't get the the software serial routines to put out anything but apparent garbage. And it's probably the same thing that is causing problems for Achilles.
    Last edited by milestag; - 17th November 2005 at 20:19.
    Jim Robertson
    "MilesTag" DIY Lasertag
    www.lasertagparts.com/mtdesign.htm
    Dayton, Ohio
« Previous Thread | Next Thread »

Similar Threads

  1. N-Bit_MATH
    By Darrel Taylor in forum Code Examples
    Replies: 38
    Last Post: - 16th December 2010, 15:48
  2. About USB
    By dias11 in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 3rd December 2009, 21:41
  3. Understanding timer issues
    By boroko in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 7th April 2009, 03:56
  4. debug not working with MPASM assempler
    By santamaria in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 4th March 2009, 08:51
  5. Data EEPROM gets clobbered during programming
    By BrianT in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 18th July 2008, 03:46

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules