Realtime video

Results 1 to 38 of 38

Thread: Realtime video

Threaded View

  1. - 15th November 2005, 02:31 #23
    RUBiksCUbe's Avatar
    RUBiksCUbe Guest

    Did you find this post helpful? Yes | No

    Default Im so close!

    I got it to compile in MPLAB!!!

    I checked out my program on the oscilloscope and I found that whenever the voltage changed, like from 0v to .33v it jumped for about .1us to 2v. I dont know why but instead of outputting a max of 1v my pic is putting out 2 to 3 volts. I guess I need bigger resistors.

    EDIT:

    Ive been timing everything down to a science and found this site (http://www.maxim-ic.com/appnotes.cfm/appnote_number/734) which has an excellent timing diagram for NTSC signals and I made my program as close as its going to get (one scanline is supposed to be 63.5us. Mine is 63.4)
    Last edited by RUBiksCUbe; - 15th November 2005 at 03:33.
« Previous Thread | Next Thread »

Similar Threads

  1. OT: Cell Phone Video Screen Design
    By kevj in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 21st February 2009, 02:30
  2. How to switch between video inputs
    By The Master in forum Off Topic
    Replies: 13
    Last Post: - 5th May 2008, 13:27
  3. Video system
    By Christopher4187 in forum Off Topic
    Replies: 0
    Last Post: - 27th April 2008, 17:49
  4. Composite NTSC Video
    By mcglacy in forum Off Topic
    Replies: 0
    Last Post: - 3rd March 2008, 11:29
  5. RF video reciever - digital tuning
    By RYTECH in forum Schematics
    Replies: 13
    Last Post: - 15th September 2006, 01:05

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules