AT/PS2 Keybord - PIC Interface?

[mytekcontrols]

On the last PS2 Keyboard Interface update (V1.2) I failed to mention that I moved KBDAT from PortB.3 to PortB.4

This allowed me to use the hardware PWM aspect of PortB.3 for something else. As I had stated in an earlier post, the KBDAT I/O line can be freely moved anywhere of your choosing, by simply changing one equate, and without impacting anything else in the code. I simply took advantage of this fact.

[Kamikaze47]

Thanks for all the time ur putting into this mytekcontrols.

I was thinking about the problem of fitting this onto a 16F84 (which will be a problem), and i remembered that the 16F84 has 64 bytes of EEPROM data memory. I wonder if I could put some of the lookup tables on that memory in order to free up program memory.

[mytekcontrols]

Kamikaze47:

Thanks for all the time ur putting into this mytekcontrols

Actually I have a self-serving interest in doing this as well. I am designing a product that incorporates this code (along with a lot of other stuff), and I find it gives me incentive to improve it when someone else is in need of the same thing.

Kamikaze47:

I was thinking about the problem of fitting this onto a 16F84 (which will be a problem)

Just curious. Any reason you are persistant on using this particular processor? You really would be much better off using an 18F series chip like the PIC18F252 or PIC18F2525. Does it have something to do with not having a programmer for these?

Kamikaze47:

...i remembered that the 16F84 has 64 bytes of EEPROM data memory. I wonder if I could put some of the lookup tables on that memory in order to free up program memory

You certainly could. But it will only be of value if can you preload the eeprom with the DATA function in PBP, or have some other way to do it through your programmer.


Have fun with your project, and the best of luck squeezing it into your F84. <img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=615&stc=1&d=1131930010 " align="absmiddle">

[Kamikaze47]

There are 2 reasons I would like to get it going on the 16F84. First its the most avaliable chip to me (can get them at my local electronics store), and secondly ive got a programmer for it. However, if need be i could modify the programmer to suit a different processor.

Anyway, ive been through the code to get familiar with it, and changed anything that would be different for a 16F84 (i dont think i missed anything). When I compile I get these warnings:

warning: unable to fit variable fsave in requested bank 16.
warning: unable to fit variable t1 in requested bank 16.
warning: unable to fit variable ssave in requested bank 16.
warning: unable to fit variable wsave in requested bank 16.
warning: unable to fit variable kbcnt in requested bank 16.
warning: unable to fit variable kbcode in requested bank 16.
warning: unable to fit variable kbindxi in requested bank 16.
warning: unable to fit variable kbindxo in requested bank 16.
warning: unable to fit variable kbbuf in requested bank 16.


*edit* Was just reading the F84 data sheet and looks like it labels the banks Bank0 and Bank1, so I changed the BankA's to Bank0's and the warnings disapeared... Got a bunch of new errors now, so will have to look at whats happening with them

[mytekcontrols]

Well if you are successful, please post your completed code, i'd love to see it .

[charudatt]

any news on the code from Kamikaze47, seems to have disappeared.

regards

[skimask]

any news on the code from Kamikaze47, seems to have disappeared.

regards

Ya, like 1 1/2 years ago...