changing from 16f876 to 18f252 file to modify

[l_gaminde]

I'm changing chips and there is a config file or some file to modify I can't remember what it is or where it is

[Ioannis]

Change according to your needs.

#CONFIG
    CONFIG  OSC = XT              ; XT oscillator
    CONFIG  OSCS = OFF            ; Oscillator system clock switch option is disabled (main oscillator is source)
    CONFIG  PWRT = OFF            ; PWRT disabled
    CONFIG  BOR = ON              ; Brown-out Reset enabled
    CONFIG  BORV = 20             ; VBOR set to 2.0V
    CONFIG  WDT = ON              ; WDT enabled
    CONFIG  WDTPS = 128           ; 1:128
    CONFIG  CCP2MUX = ON          ; CCP2 input/output is multiplexed with RC1
    CONFIG  STVR = ON             ; Stack Full/Underflow will cause RESET
    CONFIG  LVP = OFF             ; Low Voltage ICSP disabled
    CONFIG  DEBUG = OFF           ; Background Debugger disabled. RB6 and RB7 configured as general purpose I/O pins.
    CONFIG  CP0 = OFF             ; Block 0 (000200-001FFFh) not code protected
    CONFIG  CP1 = OFF             ; Block 1 (002000-003FFFh) not code protected
    CONFIG  CP2 = OFF             ; Block 2 (004000-005FFFh) not code protected
    CONFIG  CP3 = OFF             ; Block 3 (006000-007FFFh) not code protected
    CONFIG  CPB = OFF             ; Boot Block (000000-0001FFh) not code protected
    CONFIG  CPD = OFF             ; Data EEPROM not code protected
    CONFIG  WRT0 = OFF            ; Block 0 (000200-001FFFh) not write protected
    CONFIG  WRT1 = OFF            ; Block 1 (002000-003FFFh) not write protected
    CONFIG  WRT2 = OFF            ; Block 2 (004000-005FFFh) not write protected
    CONFIG  WRT3 = OFF            ; Block 3 (006000-007FFFh) not write protected
    CONFIG  WRTC = OFF            ; Configuration registers (300000-3000FFh) not write protected
    CONFIG  WRTB = OFF            ; Boot Block (000000-0001FFh) not write protected
    CONFIG  WRTD = OFF            ; Data EEPROM not write protected
    CONFIG  EBTR0 = OFF           ; Block 0 (000200-001FFFh) not protected from Table Reads executed in other blocks
    CONFIG  EBTR1 = OFF           ; Block 1 (002000-003FFFh) not protected from Table Reads executed in other blocks
    CONFIG  EBTR2 = OFF           ; Block 2 (004000-005FFFh) not protected from Table Reads executed in other blocks
    CONFIG  EBTR3 = OFF           ; Block 3 (006000-007FFFh) not protected from Table Reads executed in other blocks
    CONFIG  EBTRB = OFF           ; Boot Block (000000-0001FFh) not protected from Table Reads executed in other blocks
#ENDCONFIG

Ioannis

[l_gaminde]

Thank you
I'm glad you're still around I remember you for the early 2000'ns

[Ioannis]

You are welcome!

Ioannis

[Acetronics2]

Hi, Friend

Long time we hadn't read about you

Have a look here : https://support.melabs.com/articles/6151-meconfig

I bet It could help !

Alain

[Ioannis]

It is a pity that it is not supported anymore...

Ioannis

[Acetronics2]

It is a pity that it is not supported anymore...

Ioannis

Hi, Ioannis

The main question is ...

" How much would you pay for it ??? " ...

BTW ... How much would consumers pay for internal/external drivers to include into PBP Package ???

Good questions, ehhhhh ...

Alain

[Ioannis]

Well, currently there are two options, both free:

1. MCC the Microchip Configurator. Can be used as standalone, no need to use thw MLABX IDE

2. The Great Cow Basic that can automatically make the configuration without user intervention. After compiling, you can open the asm file and copy the configuration.

Ioannis