Analog inputs on K42 chip


+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    4,121

    Default Analog inputs on K42 chip

    Before dealing with the registers directly, does anyone know what is the sequence, if any, on the analog inputs of the above chip?

    I mean, after RA0-RA7 that corrssponds to Analog 0 to Analog 7, the port D on the datasheet is dispayed as ANDx.

    Have not tested yet but guessing Port D.2 as AN26 is it correct? Will this work on ADCIN 26 as expected?

    Will try this tomorrow and report back.

    Ioannis

  2. #2
    Join Date
    Nov 2003
    Location
    Greece
    Posts
    4,121


    Did you find this post helpful? Yes | No

    Default Re: Analog inputs on K42 chip

    Managed to test it and yes. One can count from 0 up to the last port in series for the analog inputs.

    Works just fine.

    Ioannis

Similar Threads

  1. 16F88 + 2 Analog inputs
    By ruijc in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 6th July 2010, 23:17
  2. Erratic analog inputs .
    By timseven in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 10th October 2009, 22:34
  3. Multiple analog inputs ?
    By rngd in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 25th February 2008, 15:13
  4. Many Analog Inputs
    By Ioannis in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 10th July 2006, 08:15
  5. analog inputs on 16F716
    By schwinn_rider in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 6th October 2005, 04:07

Members who have read this thread : 5

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts