Well, While that was a problem, it was not THE problem. Still no movement. I tried both mode 1 and mode 0 for the SHIFTOUT methods, also, to no avail.
Here is a snip of the circuit board design for examination. It seems pretty straight forward, so I think my issue is with setting the registers. Any thoughts are appreciated.
NOTES: There are 2 drivers on board. Green traces = 5V, Blue = Gnd, Red = 12V, Black = Signal. PIC = PIC16F877A. Thanks!
Name: Snip1.JPG Views: 1561 Size: 109.4 KB