How to check a 12 bits ADC


Closed Thread
Results 1 to 7 of 7

Hybrid View

  1. #1
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653


    Did you find this post helpful? Yes | No

    Default Re: How to check a 12 bits ADC

    Hi, Flotul,

    consider you have NO chance to get what you want with the internal ADC's of your Pic.

    that said ... if you want a "quasi-linear " behaviour, try this inexpensive chip : https://fr.aliexpress.com/item/10050...Cquery_from%3A

    But, of course, you'll have to be extra careful with all its environment ...

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************

  2. #2
    Join Date
    Aug 2006
    Location
    SWITZERLAND (french speaking)
    Posts
    952


    Did you find this post helpful? Yes | No

    Default How to check a 12 bits ADC

    Hey Alain,

    Thanks for the advice

    What about the MCP3221 I have in my drawer? Is it worth a try or should I scrap them

    I don't really know what to compare looking at ADCs.....
    Roger

Similar Threads

  1. Replies: 3
    Last Post: - 25th February 2024, 13:04
  2. How do I check (or set) a group of consecutive bits within a byte?
    By HankMcSpank in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 2nd April 2012, 09:13
  3. Problem with I2Cread command for an 32 bits ADC
    By Pilou81 in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 27th October 2011, 16:32
  4. Incorrect adc channel bits generated
    By grahamg in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 6th February 2010, 19:56
  5. parsing adc word into bits
    By GREYBIRDMAN in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 13th April 2007, 22:08

Members who have read this thread : 5

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts