What is this IC?

[Demon]

Drawer label said "wires".

I figure some sort of capacitor, not sure which variety.






And as I'm typing this I'm still googling and found this:

https://maker.pro/forums/threads/the.../#post-1734724

https://datasheets.kyocera-avx.com/SR-Series.pdf

105 = 1uF
E = Z5U
5 = 50V
M = 20%

I think it's SR215E105M or SL215E105M (mainly cause it's industry standard). The only thing that bugs me is that the dimensions are off, mine are:

6.25mm wide
7.1mm tall
3.1mm thick

That doesn't quite line up with any of them...?

EDIT: I'm sure I got this recently, and no orders matching this in 1uF from Digikey, Mouser or Newark.

[rsocor01]

Is the 451 marking in the back of the 1uF cap? If not, then it should be a 45 x 10pF = 450pF cap. I bought a leaded cap assortment one time, and it was a pain separating them by value. Some markings are not too obvious.

[Demon]

Is the 451 marking in the back of the 1uF cap? ...

Yeah, that's both faces of the same cap.

I'm "pretty" sure it's Kyocera. That post on MakerPro IDed the logo. Use the original link I got from google search:
https://electronics.stackexchange.co...d-which-datash

I use GENERIC on all my bulk purchases, with the most conservative ratings possible. ut this is a recent purchase, very possible at a local store with the specs got torn off when I opened the bag.

I'd really like to make an accurate label if at all possible.

[Demon]

...deleted blurb...


EDIT: And then I find this one, and it looks like my K when I SAVE and ZOOM.

https://ie.rs-online.com/web/p/mlccs...citors/6995165


EDIT SOME MORE:

Yeah, freagle70 IDed it as "most likely" SR-series from Kyocera as well.

https://www.reddit.com/r/AskElectron..._blower_motor/

[Ioannis]

Getting older I do not trust my eyes too much. So, a capacitance meter will help a lot. Even the cheap ones on chinese sites.

It would confirm the 1uF cap. As for the voltage and tolerance...

Ioannis