Woot! Thanks!
And yet I screwed up cause I never use 3.3V, I should have taken the DS1680FP-5.
|
Re: What is this IC?
Woot! Thanks!
And yet I screwed up cause I never use 3.3V, I should have taken the DS1680FP-5.
My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.
Not as dumb as yesterday, but stupider than tomorrow!
|
Re: What is this IC?
Drawer label said "wires".
I figure some sort of capacitor, not sure which variety.
And as I'm typing this I'm still googling and found this:
https://maker.pro/forums/threads/the.../#post-1734724
https://datasheets.kyocera-avx.com/SR-Series.pdf
105 = 1uF
E = Z5U
5 = 50V
M = 20%
I think it's SR215E105M or SL215E105M (mainly cause it's industry standard). The only thing that bugs me is that the dimensions are off, mine are:
6.25mm wide
7.1mm tall
3.1mm thick
That doesn't quite line up with any of them...?
EDIT: I'm sure I got this recently, and no orders matching this in 1uF from Digikey, Mouser or Newark.
Last edited by Demon; - 23rd December 2024 at 02:19.
My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.
Not as dumb as yesterday, but stupider than tomorrow!
|
Re: What is this IC?
Is the 451 marking in the back of the 1uF cap? If not, then it should be a 45 x 10pF = 450pF cap. I bought a leaded cap assortment one time, and it was a pain separating them by value. Some markings are not too obvious.
"No one is completely worthless. They can always serve as a bad example."
Anonymous
|
Re: What is this IC?
Yeah, that's both faces of the same cap.Originally Posted by rsocor01
I'm "pretty" sure it's Kyocera. That post on MakerPro IDed the logo. Use the original link I got from google search:
https://electronics.stackexchange.co...d-which-datash
I use GENERIC on all my bulk purchases, with the most conservative ratings possible. ut this is a recent purchase, very possible at a local store with the specs got torn off when I opened the bag.
I'd really like to make an accurate label if at all possible.
Last edited by Demon; - 23rd December 2024 at 06:00.
My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.
Not as dumb as yesterday, but stupider than tomorrow!
|
Re: What is this IC?
...deleted blurb...
EDIT: And then I find this one, and it looks like my K when I SAVE and ZOOM.
https://ie.rs-online.com/web/p/mlccs...citors/6995165
EDIT SOME MORE:
Yeah, freagle70 IDed it as "most likely" SR-series from Kyocera as well.
https://www.reddit.com/r/AskElectron..._blower_motor/
Last edited by Demon; - 23rd December 2024 at 06:29.
My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.
Not as dumb as yesterday, but stupider than tomorrow!
|
Re: What is this IC?
Getting older I do not trust my eyes too much. So, a capacitance meter will help a lot. Even the cheap ones on chinese sites.
It would confirm the 1uF cap. As for the voltage and tolerance...
Ioannis
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks