PIC16F1454 Connecting To USB Doesn't Work

[Demon]

I just hit a sweet deal. At that price, I cleaned out everything they had on hand:




These go for $3.91 / 100 at Digikey.

[rsocor01]

I just hit a sweet deal. At that price, I cleaned out everything they had on hand:

Attachment 9860


These go for $3.91 / 100 at Digikey.

Those chips are the cheapest 18F with USB according to the Microchip Advanced Selector Chip tool. I'll order some and give it a try.

[Demon]

Those chips are the cheapest 18F with USB according to the Microchip Advanced Selector Chip tool. I'll order some and give it a try.

Don't bother at Arrow / Verical. I cleaned them out.

[rsocor01]

Don't bother at Arrow / Verical. I cleaned them out.

I bought a few from Mouser. I'm hoping I can make the USB part work without any issues. I'll open a new thread if I have problems.

[Demon]

I bought a few from Mouser. I'm hoping I can make the USB part work without any issues. I'll open a new thread if I have problems.

If not you, then most likely me.


Good for using Mouser, cause those on special at JLCPCB, it's the same units I bought. They just haven't updated their global stock yet.

[rsocor01]

The 18F13K50 won't compile with the DT interrupt file ReEnterPBP-18.bas. This variable HP_Vars is in the DT ReEnter interrupt file. If you want to use this interrupt, you need to go with the 18F14K50. The 18F14K50 compiled fine, but I haven't test it because I don't have one now. I need to order it. All the USB commands compiled fine.