Voltage regulation circuit 12V to 5V in 5A range

[Ioannis]

Yes, all of these SMPS do have that high frequency transformer and do isolate the secondary. Few have poor isolation.

Many have bad fuses in the line input and they blow after the explosion of low quality capacitor/bridge/MosFet. And had cases of pcb traces that were melted also.

These two images show WellMax LED panel drivers that drop my three phase protection fuse on the wall distribution box! The pcb fuse was the last to blow after burning pcb traces!

Had other similar case of 12V/5A power supplies that were poor made. I do understand that inrush currents are high enough and the fuse should be relatively slow, but they should add a thermistor then to lower that current and have a faster fuse.

Ioannis