Framing error if I disable transmitter after shift register is empty?

[amgen]

checking your stuff........ if you use interrupts (DT ints), for RX interrupts, you would not use PB hserin in the int routine. Rather get the characters in your routine and store them in the locations you designated and advance counter and check for some beginning or ending character....... with this I receive up to 1000 characters and store them in ram on 18f with 4k ram..... you would fix for your code. If successful receive, raised a flag telling basic to process the data for whatever your looking for

'''-------------RCV INT ROUTINE----------------''''
RCint:
RCX=RCREG
'@ bcf RCSTA,4 
'@ bsf RCSTA,4   
'''@ CLRF CREN     ;RESET RCV overrun
'''@ SETF CREN

  

IF RCX=8 THEN     '''CHECK FOR BACK SPACE BS 8dec
SELECT CASE RCVindx
    CASE 0
        GOTO LEAVEOK1
    CASE 1
       RCVindx=RCVindx-1 :RCVOK=0
        RCVdata[RCVindx]=0    
       GOTO LEAVEOK1
    CASE IS >1
       RCVindx=RCVindx-1
       RCVdata[RCVindx]=0
       GOTO LEAVEOK1
END SELECT
ENDIF

if RCX = "[" then 
RCVindx=0:RCVok=1:DATAready=0   
goto leaveok 
endif  
if RCVok=0 then   LEAVEOK1    
if RCX = "]" then
rcvok=0:dataready=1 
endif 
    
leaveok:           'LEAVE AND STORE RCVD CHAR
RCVdata[RCVindx]=RCX
RCVindx=RCVindx+1
RCVdata[RCVindx]=0  'TACK A 0 AT END OF ARRAY
IF RCVindx > 999 THEN  
RCVindx=999
ENDIF
       
LEAVEOK1:          'LEAVE WITHOUT STORING RCVD CHAR
RCFLAG=1