PBP and IDE/programmer

[robertg]

Rookie mistake should have had INTIO67 not RC for the clock!!

Ahhh

[Ioannis]

I hope you do not have many MPLABX version installed. Normaly they shouls co-exist but could also mess up things. Better be safe and uninstall all other version except 5.35 that works with the latest PBP.

As a programmer, I use Elnec BeeProg 2 and PicKit3 with a stand alone program by https://pickitplus.co.uk/Typesetter/ that supports Pickit2 and Pickit3 at the same app.

Ioannis

[robertg]

Thanks,

I've removed all other installs and switched to 5.35.

But I'm having problesm with 12F508 micros, seem like I get 2 chances to program the micro then, I get failed to program device error.
Swap out the micr and same thing. Purchased from Mouser so doubt it's a dodgie chip and it's definetely not a 12C508.
Scratching my head on that one!
I've ordered the programming software you pointed me to, just waiting on the license and see how that goes.


Rob.

[richard]

sounds like you have over written the osccal/ value stored at the top of memory for 12f508.
Most programmers will not reprog that chip when the value is missing.
The old pickit2 can reset a value there, with a bit of work. Pk3 might be able to do it too.

[robertg]

Thanks,

Not sure how I would have and looking at that register even any value 0's or 1's, it would still work??
Considering the application doesn't require any precise timing, should I provide a value regardless?

But did find this as another possible reason:
https://forum.microchip.com/s/topic/...6KtEAK/t254415

Anyway I've got 5 pics left, hopefully I'll work it out soon!


Rob.

[Ioannis]

are your cable longer than 15-20 cm?

Ioanins

[robertg]

Got it worked out!

Again a probably another rookie mistake...Solution was to increase the VDD to 4V! minimum. (software does recommend 4.5V) but 4 seemed to work fine.


Thanks Ioanins for the pickit3 plus software recommendation! That's what discovered the problem.
Great little program, works heaps faster then MPLAB X pck3md
Also integrated within MCS using the pickitcommand exe, hence can delete the bloated software MPLAB X!

My 5 spare 12F508 are breathing a sigh of relief!

Big thanks again,

Rob.
P.S Ioanins I'm coming to your lovely country next week for Holis, by any chance will you be in Athens on the 10th July? I owe ya a beer!!!