Securing Dupont connectors to headers

[rsocor01]

I have used hot glue before to secure a Dupont socket onto a header pin. But, even when I don't use the hot glue the connector never moves. Unless there is a lot of vibration, I don't think the glue is necessary. I would never use loctite for that. It is too liquid and too strong.

[Demon]

I have used hot glue before to secure a Dupont socket onto a header pin. But, even when I don't use the hot glue the connector never moves. Unless there is a lot of vibration, I don't think the glue is necessary...

Yeah, I've done some light hand tests using new parts; Dupont cable clip and header pin, that clip is relatively firmly secured.

It's mostly to prevent any problems during shipping.

This is for a flight sim controller (switches, LEDs, encoders and pots). Who knows what sort of treatment the enclosure might endure by an "avid gamer". I'd like to prevent problems, especially if a dab of glue will do, and it's in the hands of a hyper kid with an obnoxious parent that will cause me grief for a refund.

... I would never use loctite for that. It is too liquid and too strong.

Yeah, that's what I was thinking. I've been reading some more on threadlocker liquids, and they're actually designed to seep into threads.

I don't think a 1/2 drive ratchet is gonna be a good idea to get the socket off the header.

[rsocor01]

Yeah, that's what I was thinking. I've been reading some more on threadlocker liquids, and they're actually designed to seep into threads.

I don't think a 1/2 drive ratchet is gonna be a good idea to get the socket off the header.

Also, some of those glue types release fumes when they are drying. The fumes can affect other parts of the circuit.

[Demon]

Also, some of those glue types release fumes when they are drying...

I did not know that.

I don't want unnecessary fumes in my workarea. Not just for me, but also for any plastics or synthetic materials.

I had stored a really nice set of speakers under my stairs. My heart sank when I noticed that the thin foam membrane around the speaker had totally degraded. Same with the foam in my Konica 35mm camera; totally turned to powder.

I know that the EVA foam that I'm using in the LCD enclosure is "supposed" to last millenia, but why risk it. A small vented paint booth is on my TO-DO list, especially for instant glue.

https://snibbs.co/blogs/foot-safety/...s%20of%20years.