PIC10F322 6 pin chip

[jackberg1]

Hello, I'm currently using the student PBP3 with Micro Code Studio version and I have a project to use some PIC10F322 / 6 pin chips.
on the devices list of the PBP3 silver edition this PIC it's included, but on the "

Compare Editions of PICBASIC PRO Compiler" it is listed chips of 8-pin through 64-pin.

I asked MELAB about this and they reply by sending me the link of the PBP3 edition device list.

I assume it's will work but like to know just before buying the silver edition.

Thank's

[Sherbrook]

There is a list of supported chips on https://pbp3.com/devicelist.html
Your chip is included

[jackberg1]

Hello, and thank's for the reply, I know the list it's included, but I'm concern about is the 6 pin chip (not the 8 pin) will work
this is my request.

[Ioannis]

On your free student edition, is the chip you want to use supported?

In either form. If it is supported then load the hex file and you are done.

Ioannis

[HenrikOlsson]

The 6-pin and 8-pin versions are exactly the same only packaged differently.
The 8-pin package has 2 pins that are N/C so there really is no difference and no reason why it should not work with the silver edition despite the "matrix" saying 8-64pins.

[jackberg1]

this pic is only on the silver, gold edition.

anyone got pbp3 codes ?

let me know,

thank's to all for help

[Ioannis]

What do you mean by "anyone got pbp3 codes ?"

Ioannis

[jackberg1]

Hello, Ioannis

I found the config for the OSC, and other.

now it's working fine

thank's to all