ESP8266 - transfer some bytes PC<>PIC over wifi

[Ioannis]

Have you found what caused the Error?

Very interesting instructable link. Thank you!

Ioannis

[HenrikOlsson]

Have you tried with CWMODE = 3?

Also, see this:

https://stackoverflow.com/questions/...ith-no-details

[flotulopex]

Have you tried with CWMODE = 3?

No. I'll give it a try when I'm back from office.

[HenrikOlsson]

I tried with an old module I had laying around.
I got the same issue no matter which CWMODE. But in the Stackoverflow post I linked to user urbanSoft (so all credit to him) writes:

That AT+CWLAP returns an error without any prior connection is desired behaviour.
The doc states that "AT+CWLAP connects an ESP station to a targeted AP with the last Wi-Fi configuration."

Since there is no last Wi-Fi configuration an error is returned.

So I tried that by connecting it to my network using AT+CWJAP="myssid","mypassword" and after that CWLAP worked as expected.

My module is really old with stock firmware. AT commands have changed and been added over the years so don't expect any and all examples you find on the internet to just work if they don't match the firmware.

[amgen]

do anyone want to try the ESP8266 programmed to be serial to WIFI 'bridge' ?? This is a few years old but all the info and files seem to be available.
Here is the link for github page

https://github.com/jeelabs/esp-link/...ster/README.md


I would post about any issues I had or suggestions if anyone wants or needs that.

[flotulopex]

do anyone want to try the ESP8266 programmed to be serial to WIFI 'bridge' ??.

Amgen, what exactly is a "bridge"? Is it what I actually want to achieve = send (small amount of) data, both ways, between a PC and a PIC over Wifi?

[amgen]

Amgen, what exactly is a "bridge"? Is it what I actually want to achieve = send (small amount of) data, both ways, between a PC and a PIC over Wifi?

Yes, instead of bridge, could use 'connection'......... what program or app would you use on the PC to receive and send data?

[flotulopex]

Have you tried with CWMODE = 3?

...as you suggested, I tried with mode 3 and:



Thank you very much Henrik

[flotulopex]

Have you found what caused the Error?

Unfortunately, no.

Still searching....