Hi there,
I juste received a bunch of very small (72x40) OLED displays driven by a SSD1306 controller.
I have absolutely never used those displays, in particular the SSD1306 controller.
After a few searches in the forum, I got some examples but these don't really help unless I first understand the very basics.
So, would anyone of you have a code snippet I could start with and ready to share it or a good reference to understand the SSD1306 please?
For example, it starts right at the beginning: there seems to be a "display" address. Is this standard for I2C displays or should I get it from the manufacturer?
Voilą, that's the low I'm right now...
So again, if somenone has basic stuff to share, I would really appreciate![]()
Bookmarks