Which is most PBP-Friendly external ADC?

[amgen]

I'm curious as to why you would want/need microvolt resolution to measure the AC voltage?

That is a good question, but on that subject, I have been wondering how the solar panel 'micro inverters' or whatever other method they use to introduce the current from the solar panels directly into the main incoming power/voltage/current......
With synchronizing 2 generators, it is easy to vary load from each by switching them together when 'in-phase' where they 'lock together' then increase or decrease the governor speed setting to vary how much watts or killo=watts each unit carry.

[tumbleweed]

It you're trying to sync two AC signals I would think the easiest/most reliable way would be to use the zero-crossings.

[amgen]

I don't want to infringe on his post here........

It you're trying to sync two AC signals I would think the easiest/most reliable way would be to use the zero-crossings.

The solar makes DC voltage, sometimes they stack the panels to get say 120 VDC or more, then somehow (with inverters that use PWM) introduce current onto/into the pure sine wave of the utility ???

[Ioannis]

Yes this is the main idea. Some installation have even higher DC voltage (reducing the current).

Ioannis

[mpgmike]

It is called a Trace Inverter. Microchip has Reference Designs, as I'm sure TI and Analog Devices do. The quickest path to success is find a reference design.

Microchip.com then Solutions in header, Power Management and Conversion, DC to AC Power Inverter Solutuions.

There are several designs to look at, which should at least give you ideas.

[CuriousOne]

I want to make myself a fast, at least 30fps screen update multimeter, which will have no range switching (either manual or automatic), and will have decent resolution in 0.1V-600V range. I already built one using built-in ADC of PIC16F1939, but 10 bits of resolution are definitely not good enough.

By fast sampling the input voltage, I guess, I can measure AC voltage too, without additional losses caused by rectification.