Leaves the mainloop???

[pescador]

try again with a red led and no resistor, i'm talking overloaded pin

yout lat code worked but...

I used this

WDTE_OFF and it didnt come out of mainloop - worked

I also tried this

PWRTE_OFF - and I was able to write to my fet which had a load connected to it - didnt work right before I changed PWRTE_ON. (NOT SURE WHY)

Also - I know trisa = % 11101101 makes the inputs and outputs - but what does your code indicate? (why 8?)

I have this:

A0 - Led1 output
A1 - led2 output
A2 - Analog in
A3 - CLR
A4 - TTL Output to turn on FET
A5 - Input (TTL)

Ports C are all ttl inputs

can you help me set these registers up richard? -

VERY MESSY

OSCCON1=%00000011
OSCCON2=%00000011

INLVLA = %00000
INLVLC = %00000
TRISC = %11111 ' MAKE INPUTS

DEFINE OSC 4
OSCFRQ_4MHZ

ANSELA = PORTA.2 ' MAKE ANALOG INPUT
ANSELC = %00000 ' MAKE DIPSWITCH INPUTS DIGITAL