First of all it is TRISIO and not TRISO. You missed the I.

Then the general case is that registers are 8 bit wide. But in the 12F675 case you have access to only the least 5 bits.

So the best way to define TRISIO is to use the 8 bit format, although 5 bits will work fine too like this:

TRISIO=%00011100 is the same as TRISIO=%11100 and that would set GPIO.0 and GPIO.1 as outputs while GPIO.2, GPIO.3 and GPIO.4 as inputs.

The rest does not matter since 675 does not have that pins I/O.

It is like the numbers, 05 is the same as 5, right?

Hope this is clear.

Ioannis