New project - MSFS C++ USB interface

[Ioannis]

With resin you need a mold I guess.

But with laser cut acrylic sheet, the pipe may not be cylindrical, or is it?

Ioannis

[richard]

With resin you need a mold I guess.

I just tape the back side and fill the hole [if you use the thick stuff you can get a nice dome if your quick], shine led for a few seconds and ..
volar instant clear led bezel.

easiest if light pipe hole is rectangular and edge on for best effect. i have used those miniature diamond hole saws to get circle shape on the edge of acrylic sheet but its a bit fiddley. its handy out when the leds don't line up with the holes in the case, like when you 3d printed a mirrored image of your stl for 7 hours and don't have the heart to do it again

[Ioannis]

Thanks for the info.

Ioannis