1 out of 1 members found this post helpful.
Did you find this post helpful?
|
Re: New project - MSFS C++ USB interface
About the components, there are tons of them but each has specific code from their sister company https://www.lcsc.com/ where you can login with Jlcpcb credentials.
When you find the component you are happy with, put the code in the appropriate BOM that will accompany your PCB files.
Or you can use their EasyEDA and all these done almost automatically because the components library of this cad has all the codes and makes it easy to produce BOM.
There are also FAQ files if you are in doubt and also BOM example files on the FAQ section, https://jlcpcb.com/help/
My last job was done in Eagle and then, with the help of the CAM file JLCPCB offers, I exported the gerber files for PCB production along with the BOM file. I can send them to you if you want to see how I done it.
About the quality of assembly, I can say that you cannot beat them. Even if I had one cold joint, it was nothing considering the work needed on my side to assembly by hand 20 PCBs by hand! A nightmare for sure!
Ioannis
Last edited by Ioannis; - 30th October 2023 at 08:56.
Reply With Quote
Bookmarks