New project - MSFS C++ USB interface

[Demon]

Nice PCB, though it needs sanding as you noted.
...
Do you know what is the smallest part you can do with your CNC?

Ioannis

Thanks.

Well, I know this can handle SOIC easily. I'm sure this could handle SSOP. The only limitation is me; my hands shake a bit now. I got some of that low-melt solder and a new hot-air gun to test some SSOP.

Last weekend I found out that QCAD doesn't have any means of milling slots; so that meant finding another PCB design software. After 30 minutes of research, I had already decided KiCAD was the one to try first. Reviews on the web gave it very high marks, and deservedly so. Took me only 2 days to get "comfy" with it; I love it, very powerful. I had to redo that circuit above from scratch; which was a good learning experience. It gave me a chance to put the 2 screws in a diagonal arrangement, with 2 headers in the opposite corners for stability.

I uploaded my new design to JLCPCB for the fun of it; just to get an idea on the upcoming costs. 26mm x 18.5mm, panelized 10 rows x 10 columns (even 100 per sheet), 5 sheets. Check this out, $22 excluding shipping. I'm not even gonna bother shopping elsewhere.


(updated with the silkscreen, paste and mask files for both sides; turns out that's all included in the price)

I have 6 of these "switch/pot/encoder adapter circuits", 4 secondary boards (maybe 4" x 6"), and one USB master (that won't be very big). It looks possible to keep that under or close to $10 with JLCPCB.

Robert