you just need to modify the .INC in the PBP folders. My own file looks like that
Code:
;****************************************************************
;* 18F4550.INC *
;* *
;* By : Leonard Zerman, Jeff Schmoyer *
;* Notice : Copyright (c) 2004 microEngineering Labs, Inc. *
;* All Rights Reserved *
;* Date : 12/31/04 *
;* Version : 2.46 *
;* Notes : *
;****************************************************************
NOLIST
ifdef PM_USED
LIST
"Error: PM does not support this device. Use MPASM."
NOLIST
else
LIST
LIST p = 18F4550, r = dec, w = -311, f = inhx32
INCLUDE "P18F4550.INC" ; MPASM Header
; __CONFIG _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
; __CONFIG _CONFIG1H, _FOSC_HSPLL_HS_1H
; __CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_128_2H
; __CONFIG _CONFIG3H, _PBADEN_OFF_3H
; __CONFIG _CONFIG4L, _LVP_OFF_4L & _ICPRT_OFF_4L & _XINST_OFF_4L
NOLIST
endif
LIST
EEPROM_START EQU 0F00000h
BLOCK_SIZE EQU 32
not much.. it's the whole file i have.
Do you still use the Bootloader? Did you also use the DEFINE OSC 20?
How about your current one?
Bookmarks