Eagle & Tait's Programmer

Results 1 to 6 of 6

Threaded View

  1. - 17th October 2005, 01:45 #2
    Mike_Lynch's Avatar
    Mike_Lynch
    Mike_Lynch is offline Junior Member
    Join Date
    Apr 2005
    Posts
    32

    Did you find this post helpful? Yes | No

    Default

    I don't have a "TAIT Programmer" right off, but if you can use the El Cheapo PICmicro Programmer from Myke Predko
    (see http://www.myke.com/elcheapo.htm ) then I have the schematic and board files in Eagle and you are welcome to copy. As it stands the board is 2 inch x 3 inch single sided, I added a 10 PIN HEADER for "OFF BOARD ICSP" and the board has an isolated flood fill (not a GROUND PLANE) to eliminate excess etching, everything is in 20 mil trace width. Attached is a small image file of the board, take a look and let me know if you want the Eagle files.

    Mike L.
    Attached Images Attached Images  
    Last edited by Mike_Lynch; - 17th October 2005 at 01:57.
« Previous Thread | Next Thread »

Similar Threads

  1. Melabs U2 Programmer Command Line Options
    By Robert Wells in forum General
    Replies: 5
    Last Post: - 3rd July 2009, 02:11
  2. problems with USB programmer
    By malc-c in forum General
    Replies: 7
    Last Post: - 10th May 2007, 20:14
  3. USB programmer problems
    By uiucee2003 in forum USB
    Replies: 2
    Last Post: - 15th August 2006, 23:47
  4. Melabs USB Programmer
    By tmurph in forum General
    Replies: 1
    Last Post: - 25th December 2005, 03:25
  5. General Programmer Questions
    By mslaney in forum General
    Replies: 1
    Last Post: - 17th December 2004, 18:16

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules