HSERIN HSEROUT 9BIT & PARITY (Output is Losing a bit!)


Results 1 to 13 of 13

Threaded View

  1. #5


    Did you find this post helpful? Yes | No

    Default Re: HSERIN HSEROUT 9BIT & PARITY (Output is Losing a bit!)

    Yes but setting the decoder to 8E1 on the input gives parity errors. ???

    Attached is some logic 1.2.40 data. The top line is the incoming data.

    Perhaps some kind soul could have a look at it and see what they make of it.
    Have I got the baud rate/parity etc right for the incoming data decoder?
    I've tried loads of variations!!

    The shortest pulse is about 20us

    Note the output data is now at least the same length as the input and the receiving device seems to accept it, but the output decoder with the same settings as the input gives errors!!!

    LogicData.zip
    Last edited by retepsnikrep; - 10th January 2023 at 07:31.

Similar Threads

  1. Replies: 8
    Last Post: - 11th July 2011, 20:20
  2. Loading a BIT array, losing my mind!
    By PlantBob in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 19th January 2011, 13:26
  3. Hserin & Hserout - Trying to blink an LED
    By Megahertz in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 24th May 2010, 12:25
  4. Bit/Byte array for Hserin/Hserout
    By mrx23 in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 1st September 2006, 23:07
  5. 8 data and parity using HSERIN, HSEROUT
    By Smity42 in forum Serial
    Replies: 2
    Last Post: - 3rd April 2006, 01:45

Members who have read this thread : 2

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts