It is that simple and it works every time (klokslag) here is one of those learning opportunities, keep your leads short!
|
Steve
It is that simple and it works every time (klokslag) here is one of those learning opportunities, keep your leads short!
|
In ideal weather, environement it always work... But those ideal conditions are not 100% guarantee... or i live in a really bad country and MUST absolutely move to another to ensure all those Thousands RF-Stuff i design will always work... problem-free by using your method.
OUfs at least i'd never had to spend more than 50 000$ for any IFR spectrum Analyser/Signal Generator and such to analyse/record any site we install those units... I'm just too familiar with RF to know what may happen or not.
Even worst when you analyse a site for a TV or Music show with over 30 RF frequency to match together in any condition...
Just kidding Chris, don't take it too hard.
Last edited by mister_e; - 17th March 2006 at 15:51.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Pic 2 Pic
Yes Steve I agree with you, where there is modulation, FM or AM but at 1400 baud who is worried about QRM or frequency drift and with a solid state antenna (PCB loop) that $50,000 spectrum analyzer will only pick up the first harmonic.
PS PS I send my data in a 5X loop one of the streams will be received
Last edited by ChrisMicro; - 18th March 2006 at 07:15.
|
Pic 2 Pic
Mario
If you still get garbage try the following
Transmitter:
SerOut PORTA.6,N1400,["A",data,data,.....]
Receiver:
SerIn PORTA.5,T1400,["A"],B0,B1,B2,.... '
Check on your scope if the output of your receiver is the same polarity as the input of your transmitter, if its not you will get garbage
Last edited by ChrisMicro; - 18th March 2006 at 11:18.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks