I2C LCD help needed

[aerostar]

Code is modified from Steve Earl have left his code but remmed out stuff I did not use.

Biggest problem is getting the address correct.
Picture is adapter used. (Ebay) LCDs with adapter attached can be ones that the address is fixed.

As it came it was 0x27 Dec 39 but I had to double it for pbp to 0x4e dec 78.
Tried to put the code in code tabs but not all would appear, so I zipped it as picforum.zip

Code is for 12f683 but will/should work with any other pic, just change the ports and pic config



picforum.zip

^^^^^^ ZIP File