Good.
So I have to "learn" to use SPI eeprom 1st, and then use MSSP
By the way, if I leave current setup as is - using I2C, but use PIC running at say 32mhz (instead of current 8mhz), will this result 4x times faster reading speed or not?
|
Re: My "Library" for ST7920 Graphical displays, works fine, but...
Good.
So I have to "learn" to use SPI eeprom 1st, and then use MSSP
By the way, if I leave current setup as is - using I2C, but use PIC running at say 32mhz (instead of current 8mhz), will this result 4x times faster reading speed or not?
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks