Pulsout Pic16F630 @16Mhz problem

[richard]

if you have pbp3 then a config looks loke this

#CONFIG
  __config  _HS_OSC & _WDT_ON & _PWRTE_OFF & _MCLRE_ON & _BODEN & _CP_OFF & _CPD_OFF
#ENDCONFIG

@ Device Pic16F630,HS_osc, wdt_off, pwrt_on,protect_off, mclr_off

looks wrong for any version

[zorgloub]

I just tried this command.
It is not recognised on my PBP 2.40
But I guess without this configuration line, setting the fuses in IC-Prog is also valid and sufficient?
"My" command was valid for my Pic16F84A.