Timer does not work 12F675

[CocaColaKid]

Oops, the config fuses were set to PM assembler. This is the correct code to MPASM. Sorry about that.

@ __CONFIG _INTRC_OSC_NOCLKOUT & _WDT_ON & _PWRTE_ON & _MCLRE_OFF & _BODEN_ON & _CPD_OFF & _CP_OFF
	' System Clock Options (Internal)	
	' Watchdog Timer
	' Power-On Timer
	' Master Clear Options (Internal)
	' Brown-Out Detect
	' Data Memory Code Protect
	' Program Code Protection

Are you sure your running v1.45 and not v2.45. That would have to be pretty old if that is correct.

[Leonardo]

Hello,

The code I cannot compile it with the PBC???.

Oops, the config fuses were set to PM assembler. This is the correct code to MPASM. Sorry about that.

@ __CONFIG _INTRC_OSC_NOCLKOUT & _WDT_ON & _PWRTE_ON & _MCLRE_OFF & _BODEN_ON & _CPD_OFF & _CP_OFF
	' System Clock Options (Internal)	
	' Watchdog Timer
	' Power-On Timer
	' Master Clear Options (Internal)
	' Brown-Out Detect
	' Data Memory Code Protect
	' Program Code Protection

Are you sure your running v1.45 and not v2.45. That would have to be pretty old if that is correct.

[Leonardo]

I have version 1.45

Thanks

[CocaColaKid]

Oh, what a dummy I am. I thought you were using PBP. I'm not sure what the differences are since I use PBP and it works fine for me. I can't even try to compile it so I'm not too much help unfortunately.

[Leonardo]

Then I must compile it with PBP?.

Thanks

[CocaColaKid]

I'm not sure which commands it does not like since I'm not familiar with PBC. There should be much of a problem since the commands aren't overly complex that are used.

[CocaColaKid]

I just thought of something else that might be the cause of your problems. You have to edit the 12F675.INC file located in the PBC folder and comment out this line by putting a ; in front of it.

__config _INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_ON & _CP_OFF