Looking for info - functions built-into PBP3 for controlling HD44780 displays?

[pedja089]

Yes there is file. You can edit it. There is example on forum cale LCD-AnyPIn, or something like that. But always have backup if you edit it.
You can find it in few places.
in PBP3 instalation folder there is few files .lib.
eg
pbppi14e.lib
Files correspond to PIC family.
For LCD look in that file for

	btfsc   LCDINITFLAG     ; Has lcd been inititalized?
        goto    lcdout1         ; Yes

        movlw   15100 >> 8      ; Wait at least 15ms
        movwf   R0 + 1
        movlw   low 15100
        call    PAUSEUSL

        movlw   33h             ; Init lcd
        movwf   R3              ; Save char
        call    lcdloop         ; Send init

        movlw   4200 >> 8       ; Wait at least 4.1ms
        movwf   R0 + 1
        movlw   low 4200
        call    PAUSEUSL

        call    lcdloop         ; Send init (33) again

        movlw   100             ; Wait at least 100us
        call    PAUSEUS

        call    lcdloop         ; Send init (33) one more time

    if ((LCD_BITS) == 8)
      if ((LCD_LINES) == 1)
        movlw   30h             ; 8-bit mode, 1 line, 5x7 font
      else
        movlw   38h             ; 8-bit mode, 2+ lines, 5x7 font
      endif
    else
        movlw   22h             ; Send init to 4-bit mode
        movwf   R3              ; Save character
        call    lcdloop         ; Set interface to 4-bit mode
      if ((LCD_LINES) == 1)
        movlw   20h             ; 4-bit mode, 1 line, 5x7 font
      else
        movlw   28h             ; 4-bit mode, 2+ lines, 5x7 font
      endif
    endif
        call    lcdoutcom       ; Send function set

        movlw   0ch             ; Display on, no cursor, no blink
        call    lcdoutcom

        movlw   01h             ; Display clear
        call    lcdoutcom

        movlw   06h             ; Lcd entry mode set, increment, no shift
        call    lcdoutcom

        bsf     LCDINITFLAG     ; Set to initialized

        movf    R3 + 1, W       ; Get saved char back (again)
        goto    lcdout1

lcdoutcom bsf   LCDCDFLAG       ; Set for command

everything between is LCD initialization.
In .lib files, there is bunch stuff that is optionally compiled. If you want to see just stuff that your code uses(there are again some optionally parts included) look for file .LST in your project folder.
And also search for same stuff as in lib. And you will se what PBP is doing in background.

[dw_picbasic]

Wonderful!
Thank you very much!