I'm doing a more featured custom decoder, which will display both letters and digits on max7219 7 segment display. It will also have custom decoder for digital values. The code is below:

Code:
FOURD=12345 'test value
dstart=2 'start segment
DLEN=2 'decode length

TEST: 'test digits
FOR x=DLEN TO 1 STEP -1
Z=FOURD DIG X+1	'EXTRACT VALUE
GOSUB FOURDEC
PAUSE 500
NEXT
GOTO TEST

FOURDEC:	'DIGIT DECODER
if Z=0 then Y=126
if Z=1 then Y=48
if z=2 then Y=109
if z=3 then Y=121
if z=4 then Y=51
if z=5 then Y=91
if z=6 then Y=95
if z=7 then Y=112
if z=8 then Y=127
if z=9 then Y=115
low load
shiftout datapin,clockpin,1,[x+DSTART-1, y]	'DISPLAY THE LETTER
high load
RETURN
This code works, but DLEN instead of cropping digits from the left, crops them from the right - say initial variable is "12345" and I want to display 2 digits from it, I'm getting "45" instead of "12", have no idea why. Same for start position - DSTART starts from rightmost position, instead of leftmost....