thanks,
let me try to explain....

The correction is applied every 150 msec.
let me say that at t=0 the correction is applied.
At t+50 msec the power supply output is completely set.
1> Should I wait 50 msec + 68 msec to get fitered data from INA219 ? ( without looking at the end of conversion bit ).
2> what is the operation of the end of conversion bit ? Is it relevant to What start of conversion ? How is the "start of conversion" started ?
3> what is the triggered mode ? I can not find any description on the ds.

Thanks for helping.
regards
Ambro