thank you
David
So sorry on the original schematic I had the gate on the triac on the wrong pin. The gate is on pin 3 not pin 2
![]()
David
Last edited by Ioannis; - 7th July 2020 at 22:23.
I see you have corrected the image, right?
Ioannis
yes I corrected it and had to upload it again.
CAP100 is showing the wrong polarity.
Sorry about that strangely I could not find a non-polarized cap symbol and choose that one and forgot to flip it. Let me search in the program some more to see if I can find a non-polarized one. There are so many symbols mostly based on part numbers. Hard to find just general symbols.
David
I found one finally it's not in the CAP category either. thanks for catching that.
![]()
Last edited by DavyJones; - 8th July 2020 at 11:45.
Bookmarks