Testing a GSM module via Mecanique's Serial Communicator - "terminator" issue?

[flotulopex]

My module's firmware is Revision:1418B02SIM800L24

[flotulopex]

...and this the exact module I'm using.

[Ioannis]

Finally I found the module and time to test the SIM900 board.

Unfortunatelly, while on Power up the module sends what is expected to send, it does not respond to the commands I send.

Tried any combination but failed to reply back...

Sorry but could not help.

Ioannis

[flotulopex]

Thank you Ioannis.

I'm awaiting a SIM5360EVB and I will try again if the LF or CR makes the difference.