Setting 8Mhz clock speed on PIC16F684

[LEDave]

Thanks again Richard.

So as long as I use DEFINE OSC X, PB knows and compensates for the change still giving the correct timings PAUSE etc?

David

[Dave]

Yes, That is correct. The PAUSE command is based on the OSC frequency. If you had an 4 Mhz. crystal connected and told PBP that the OSC was 8Mhz. the PAUSE command would give you 2 times the value entered into the PAUSE command.

[LEDave]

Dave & Richard, thank you both for taking the time to reply, much appreciated.

Dave