DT's INT's on 16F1936 an other stuff

[MOUNTAIN747]

Thanks for the reply. So I feel better about the interrupts. Serout, ok.

asm
 __config _CONFIG1,_FOSC_INTOSC & _CLKOUTEN_OFF & _MCLRE_ON & _BOREN_OFF & _WDTE_OFF & _FCMEN_OFF & _CP_OFF & _CPD_OFF & _IESO_OFF
 __config _CONFIG2, _WRT_OFF & _PLLEN_OFF & _STVREN_ON & _BORV_LO 
endasm  
define  osc 8 
    OSCCON=%01110000   ;1110=8Mhz                                                   
    ANSELA=0   
    ANSELB=0    
    ADCON0=0
    PortA=0
    PortB=0                                      
    PortC=0 
    TrisA=0                                                                                
    TrisB=0        
    TrisC=0 

Start:  
    toggle LatA.1
    pause 100
    toggle LatA.1
    serout2 USB_Tx,188, ["    Hello USB World",13,10]     'working 188 at 9600baud on com15 @8Mhz 
    pause 3000
    goto Start

At mode 84 I'm getting 19200baud. Beats me what is going on. Of course if its working fine, not a big deal.
Wayne

[richard]

there the problem
define osc 8
should be
define OSC 8

[MOUNTAIN747]

thanks Richard, I try that out. thats something I never thought about.
Wayne

[MOUNTAIN747]

Changing "osc" to "OSC" did the trick. Com now acting as it should.
Thanks.