Confirm 18f47k40 MSSP setting and allocation using PSS

Results 1 to 18 of 18

Threaded View

  1. - 16th February 2020, 22:58 #12
    longpole001's Avatar
    longpole001
    longpole001 is offline Senior Member
    Join Date
    Feb 2012
    Location
    PERTH AUSTRALIA
    Posts
    838

    Did you find this post helpful? Yes | No

    Default Re: Confirm 18f47k40 MSSP setting and allocation using PSS

    in this config ,if microchip had considered it would have been nice to allow the master and slave not to have a data input pin Have to be assigned , allowing for them to be used as I/O

    the master where no slave is needed still need the data input port assigned in PPS and SSP from the setting i have seen


    Name: test.JPG Views: 1360 Size: 140.4 KB
    Last edited by longpole001; - 16th February 2020 at 23:10.
« Previous Thread | Next Thread »

Similar Threads

  1. PBP RAM allocation - how to find available or total used RAM?
    By mculibrk in forum mel PIC BASIC Pro
    Replies: 18
    Last Post: - 6th October 2021, 16:19
  2. Pwm settings for 18f47k40
    By longpole001 in forum PBP3
    Replies: 2
    Last Post: - 19th December 2019, 00:35
  3. MCP23S17 - Three different approaches - ShiftIn/ShiftOut / MSSP+PBP / MSSP+ASM
    By gadelhas in forum Code Examples
    Replies: 18
    Last Post: - 30th July 2012, 10:00
  4. Change variable allocation to save code space
    By aberco in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 5th September 2011, 01:28
  5. Mssp
    By capitano in forum Code Examples
    Replies: 2
    Last Post: - 15th December 2004, 19:33

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules