Hi Darrel,

I’m a bit confused by your last post.
I’m not sure were to add this code. Also I have the feeling that the big_number[0] and big_number[1] are switched from the way they are in my code.

Here is the code in “colors” format:

Code:
<font color="#000000"><b>INCLUDE </b><font color="#FF0000">&quot;modedefs.bas&quot;
</font><font color="#008000">@	device  pic16F876a,hs_osc,pwrt_on, protect_on
</font><b>DEFINE </b>OSC 16
<b>DEFINE</b>	LOADER_USED	1
<b>DEFINE </b>HSER_RCSTA 90h
<b>DEFINE </b>HSER_TXSTA 20h
<b>DEFINE </b>HSER_BAUD 4800
<b>DEFINE </b>HSER_CLROERR 1

HighDigits  <b>VAR     WORD
</b>LowDigits   <b>VAR     WORD
</b>big_number  <b>VAR     WORD</b>[2]   <font color="#000080"><i>; 32-bit varia
</i></font>in_low      <b>VAR     WORD
</b>in_high     <b>VAR     WORD
</b>led         <b>VAR     </b>PORTA.2

ADCON1=6
CMCON=7	

<b>ASM  
</b><font color="#008000">MOVE?CN  macro Cin, Nout
    MOVE?CW  Cin &amp; 0xFFFF, Nout     </font><font color="#000080"><i>; Low Word
    </i></font><font color="#008000">MOVE?CW  (Cin &gt;&gt; 16), Nout + 2  </font><font color="#000080"><i>; High Word
  </i></font><font color="#008000">endm
</font><b>ENDASM
ASM
</b><font color="#008000">PutMulResult?N  macro Nin
    MOVE?WW  Nin, R2
    MOVE?WW  Nin + 2, R0
  endm
</font><b>ENDASM
    PAUSE </b>1000
    <b>HSEROUT </b>[13,10,<font color="#FF0000">&quot;Waiting for Big_number&quot;</font>,13,10]
    <b>HSERIN </b>[<b>DEC4 </b>in_high,<b>DEC4 </b>in_low]

main:
<font color="#008000">@   MOVE?CN  20000, _big_number
</font><b>WHILE </b>(big_number[1] &gt; 0) <b>OR </b>(big_number[0] &gt; 0)
    big_number[0] = big_number[0] - 1
    <b>IF </b>big_number[0] = $ffff <b>THEN </b>big_number[1] = big_number[1] - 1
<font color="#008000">@   PutMulResult?N  _big_number
    </font><b>GOSUB </b>SendBigNum
    <b>TOGGLE </b>led
<b>WEND
    PAUSE </b>5000
    <b>GOTO </b>main
SendBigNum:
    HighDigits = <b>DIV32 </b>10000
    LowDigits  = R2
    <font color="#000080"><i>'IF (HighDigits &gt; 0) THEN
        </i></font><b>HSEROUT </b>[<b>DEC4 </b>HighDigits, <b>DEC4 </b>LowDigits,<font color="#FF0000">&quot; and &quot;</font>,<b>DEC4 </b>in_high,<b>DEC4 </b>in_low,13,10]
    <font color="#000080"><i>'ELSE
        'HSEROUT [DEC4 LowDigits,13,10]
    'ENDIF
</i></font><b>RETURN

END
</b>
How do I process the in_low and in_high variables to get the big_number before entering the main loop?
Am I pulling them right as DEC4 or should I do it differently?

Regards,

Nick