Hi guys
The IOC options on this chip are very good , with both neg/ pos trig selection on most of the ports
The dt_int18-34c currently does not appear the clear IOCxF bits after being trigger even if the flagreset is set
Code:
ASM
INT_LIST macro; IntSource, Label , Type, ResetFlag?
INT_Handler IOC_INT, _Rx_mode_IOC , PBP, yes ; Call Rx_mode_IOC subroutine for RF RX_mode
endm
INT_CREATE ; Creates the Interrupt Processor
ENDASM
also enable/disable of IOC " @ INT_DISABLE IOC_INT " ( PIE0.4 = 0) , will not stop the IOC interrupt being set on the IOCxF
the triggered IOC port flag bit needs to be cleared after the interrupt is serviced - eg IOCxF.x = 0
this what i found for my 27k40 silicon 0 ,
but if i am wrong please check and correct me
cheers
Sheldon
Bookmarks